Super Screen / No-See-Um Installation in St. Johns, FL
Ultra-fine mesh that blocks even the smallest insects.
Fast-growing community with large pool homes and outdoor entertainment spaces.
Expert Super Screen / No-See-Um Installation for St. Johns Homeowners
Super Screen (no-see-um screen) features an ultra-fine mesh that blocks tiny insects like gnats and no-see-ums while maintaining good airflow and visibility.
Benefits
- ✓Blocks smallest insects
- ✓Stronger than standard screen
- ✓Better durability
- ✓Excellent for coastal areas
Our Process
- 1Determine coverage areas
- 2Remove existing screening
- 3Install super screen material
- 4Secure with proper spline
- 5Inspect for gaps
Warranty
2 year warranty on material and installation
Durbin Creek drains roughly 150 square miles of wetland and conservation buffer through the heart of St. Johns County before emptying into the St. Johns River south of Julington Creek Plantation — and every one of those wet acres pumps Culicoides midges directly into screened patios from late April through October. Standard 18x14 fiberglass mesh stops mosquitoes with no problem, but the mesh openings measure about 1.4mm across, which is nearly twice the body width of an adult no-see-um. Homeowners in Durbin Crossing figure this out the first summer: the cage is intact, no visible holes, but the bites keep coming every evening. Upgrading to Phifer's 20x20 BetterVue or TexTreme super-screen drops that opening size to roughly 0.6mm — small enough to block midges while still allowing meaningful airflow through the enclosure. P&D Screen Repair handles these panel swap-outs across 32259 and surrounding zip codes without touching the existing aluminum frame in most cases, which keeps cost and downtime low.
The master-planned communities concentrated in the 32259 zip code — Julington Creek Plantation, Durbin Crossing, Aberdeen, and Beachwalk — were built primarily between 1998 and 2018. That puts original pool cage mesh anywhere from 8 to 27 years old, squarely in the window where Phifer fiberglass begins showing UV fiber degradation and spline groove loosening. Homes that back up to Durbin Creek wetland preserves or retention pond buffer zones face the highest no-see-um density in the county because those conservation easements receive no larvicide treatment. Further west in 32092, the Rivertown and World Golf Village corridor runs right along the St. Johns River floodplain — same hydrology, same insect pressure, same upgrade need. HOA architectural review boards in all these communities track screen color, frame finish, and panel uniformity closely. A super-screen swap-out needs to match the existing anodized aluminum frame — typically charcoal or dark bronze — and use a Phifer mesh tint that reads consistently from the street before any board will sign off on it.
Common Super Screen / No-See-Um Installation Issues in St. Johns
No-See-Ums Penetrating Intact 18x14 Screen in Julington Creek Plantation
This is the call we get most from St. Johns. The cage has no tears, no missing panels, passes a visual inspection — but no-see-ums are active inside every evening from June through September. Standard 18x14 fiberglass mesh was the industry default when most Julington Creek Plantation cages were built, and it works fine for mosquitoes. Culicoides midges are smaller. The mesh opening on 18x14 runs about 1.4mm; smaller no-see-um individuals measure 0.6-0.8mm and pass straight through undamaged fiberglass. Swapping every panel to 20x20 Phifer BetterVue closes that gap. New York Wire also makes a comparable 20x20 fiberglass no-see-um mesh, but Phifer's UV coating has held up better in Florida's intense summer sun over the long term. Panel swap-outs in the 32259 area run $3–$5 per square foot installed; a typical 900-square-foot cage comes out between $2,700 and $4,500 total depending on existing frame condition.
Spline Groove Damage From DIY Mesh Removal in Durbin Crossing Cages
A lot of homeowners in Durbin Crossing and Aberdeen pull the old screen themselves before calling anyone. The spline — the rubber or vinyl cord pressed into the aluminum groove to lock mesh in place — looks straightforward to remove. Yank it wrong and the spline groove edge bends or splits, making clean re-splineing impossible without routing the groove or replacing the rail section entirely. Extruded anodized aluminum frames from the early 2000s, which are common throughout the 32259 zip code, are not forgiving once that groove deforms. In a worst case, a full 2x2 hollow-tube rail swap is cheaper than trying to salvage a badly damaged groove. P&D brings dedicated spline rollers and pre-cut 0.175" spline cord to every super-screen install, setting consistent tension across each panel so the mesh sits flat without sag. Mismatched spline diameter — using 0.140" cord in a 0.175" groove, for instance — causes panel blowout in the first real thunderstorm.
HOA Color-Match and Approval Requirements for Super-Screen Upgrades
Julington Creek Plantation, Aberdeen, and Beachwalk all run active architectural review committees. Swapping mesh type — even without touching the frame — can trigger a review request if the mesh color or visible opacity changes noticeably from street view. Standard 18x14 charcoal fiberglass and Phifer BetterVue in matching charcoal look nearly identical, but some HOAs in 32259 have flagged 90% solar privacy mesh upgrades because the enclosure appeared darker from the curb. Submitting paperwork before starting protects against fines and mandatory re-work at your expense. P&D Screen Repair, operating under Florida contractor license #1136541, prepares a written scope with mesh specs, Phifer color codes, and manufacturer data sheets that most boards in this area accept without a formal hearing. Typical review turnaround in Julington Creek Plantation runs 2–3 weeks. Submit at the start of the season if you want install completed before summer no-see-um pressure peaks in late May.
Partial Panel Swap vs. Full Rescreen Cost in St. Johns
Full rescreens — all panels replaced with new 18x14 standard mesh, same frame — run $800–$2,500 for a typical residential cage in St. Johns. Upgrading every panel to 20x20 Phifer TexTreme during that same job adds roughly $500–$900 depending on cage square footage. For a targeted swap — lower kick-plate panels and side walls only, leaving roof panels in existing standard mesh — the total comes down to $700–$1,500 for a 900-square-foot cage. The two-year warranty P&D backs on super-screen installs covers both mesh and spline labor, which is real protection on an upgrade that costs more upfront. Pricing also moves if the frame needs work: damaged corner brackets, corroded anchor bolts at the slab, or split spline grooves on older sections each add to the total. The on-site estimate breaks all of that out in writing before any work starts.
20x20 Mesh Lifespan and Annual Maintenance Near Wetland Preserves
Phifer TexTreme and BetterVue are UV-stabilized fiberglass products rated roughly 10–15 years under standard conditions. Homes directly adjacent to Durbin Creek conservation areas in 32259 see higher organic debris load than homes in open subdivisions — pollen, mold spores, and fine particulate from the wetlands clog the tighter 20x20 weave faster than 18x14. Clogged mesh holds moisture, which accelerates fiber breakdown. Rinse it annually with a garden hose on a gentle fan setting; pressure washing stresses the spline seal at the groove edge and loosens tension over time. Check corners every fall — UV causes spline shrinkage that shows up first at the corner brackets where tension is highest. A loose corner is a storm blowout waiting for the right gust. Replace individual panels showing visible sag or discoloration; don't wait for a full panel failure. Call (904) 679-9509 for a free on-site inspection — P&D will identify which panels are close to end-of-life and which ones have several seasons left.
Frequently Asked Questions
How fast can you get to St. Johns for a super-screen estimate?▼
St. Johns sits roughly 25–30 minutes south of Jacksonville via US-1 or I-95 to CR-210, so same-week estimates are standard — typically within 2–3 business days of your call. Install scheduling usually follows within 5–7 days of estimate approval. Peak season from May through September can push that window to 10–14 days as demand increases. For urgent situations — bug pressure spiking before a planned outdoor event, or storm damage heading into hurricane season — call (904) 679-9509 directly and ask about priority scheduling. Crews cover Julington Creek Plantation, Durbin Crossing, Beachwalk, and Rivertown regularly. Free on-site estimate, no deposit required to get on the schedule.
What does a 20x20 super-screen panel swap-out cost in St. Johns?▼
Super-screen swap-outs run $3–$5 per square foot of mesh surface installed, using Phifer BetterVue or TexTreme 20x20 mesh. A standard residential pool cage in the 32259 area typically runs 700–1,200 square feet of screenable surface, putting total cost between $2,100 and $6,000. Partial installs — lower panels and side walls only — come in lower. Frame condition is the biggest variable: damaged spline grooves, split corner brackets, or corroded anchor bolts add cost the on-site estimate will itemize clearly. Get a free on-site estimate with exact pricing by calling (904) 679-9509 — we measure the cage, assess every section of frame, and provide a written quote the same visit.
Do I need HOA approval before upgrading to super-screen in Julington Creek Plantation or Aberdeen?▼
Most HOAs in the 32259 and 32092 zip codes require an architectural review submission before any exterior modification, including mesh type or visible opacity changes. A straight swap from standard charcoal 18x14 to Phifer BetterVue in matching charcoal is rarely rejected — but submitting before install protects you from fines if a neighbor reports the change. P&D Screen Repair operates under Florida contractor license #1136541 and prepares a written scope document with Phifer color codes and mesh spec sheets that most HOA boards in this area approve without calling a formal hearing. Julington Creek Plantation's review committee typically turns around simple screen submissions in 2–3 weeks. Start the process early in spring if you want install completed before peak no-see-um season.
Can you do a dual-layer super-screen installation for maximum no-see-um protection?▼
Dual-layer installs — two layers of 20x20 mesh in the same panel frame — do come up for homeowners right on the Durbin Creek preserve line or backing directly onto a retention pond. The trade-off is real airflow reduction, sometimes 30–40% compared to a single layer. More practical for most St. Johns homes is pairing 20x20 Phifer TexTreme on the side and lower panels with a 90% solar privacy mesh on any panel facing a water view. That handles midge exclusion while blocking sight lines across the water without the airflow hit of true dual-layer. In dual-layer frames we use 0.200" spline rather than 0.175" to maintain proper tension without overtightening the groove edge. Call (904) 679-9509 and describe your yard layout — we'll recommend the right configuration for your specific exposure.
What warranty covers a super-screen install from P&D Screen Repair?▼
Super-screen and pet screen installs carry a 2-year workmanship warranty covering mesh, spline work, and installation labor. Standard 18x14 rescreen work carries a 1-year workmanship warranty. Both warranties cover panel failure, spline pullout, and installation defects under normal conditions. Storm damage from named hurricanes or direct impact from falling debris is not a workmanship defect — that routes through homeowners insurance, and P&D provides full photo documentation plus a written damage report for insurance claims at no extra charge. Phifer's manufacturer warranty on TexTreme and BetterVue mesh runs separately and covers UV degradation beyond normal aging. Premature mesh failure under typical St. Johns County conditions, with Phifer-grade mesh installed correctly, is uncommon before the 10-year mark.
What other cities near St. Johns does P&D Screen Repair cover?▼
P&D covers all of St. Johns County — Ponte Vedra Beach, Fruit Cove, Nocatee, Palm Valley, World Golf Village, and south into Palm Coast and Flagler Beach in Flagler County. Clay County work in Fleming Island and Orange Park is routine, as is Duval County coverage in Mandarin, San Jose, Baymeadows, and along the Southside. Crews heading to St. Johns run I-95 to CR-210 or US-1 south with no significant delay outside morning rush. Scheduling windows run Monday through Saturday with confirmed arrival windows sent by text the evening before. Call (904) 679-9509 or request an estimate online — same-week availability is typical outside of active storm response periods.
Need Super Screen / No-See-Um Installation in St. Johns?
Free on-site estimate, fast response, 1-year warranty.
(904) 679-9509Other Services in St. Johns
Patio Screen Door Replacement
Fixing or replacing door screens, handles, hinges, latches, and springs.
Pool Enclosure Repair
Complete pool cage repair including screens, frames, and structural elements.
Patio Hardware Replacement
Replacing rusty screws, bolts, hinges, and other small components that hold your screen structure together.
Why Choose P&D Screen Repair?
Quality Guaranteed
1-year warranty on all work. We use premium materials and expert craftsmanship.
Fast & Reliable
Most repairs completed same-week. Free estimates within 2 business hours.
Local & Trusted
Family-owned, serving Jacksonville since 2022. Licensed and insured.
What Our Customers Say
Paul was extremely professional, responsive and competitive. I appreciate a business that exhibits proper ethics in a manner as was displayed in this project. Thank you, Paul
Great service On time and good quality
Excellent job!! Very nice young man! Absolutely would recommend!
P&D Screen Repair did an outstanding job on a complete pool screen. They finished the job in 2 days, despite constant rain. I highly recommend this company and their prices are very reasonable.
Great job on my patio rescreen! Everything was done fast, clean, and with excellent quality. Very professional and easy to work with. I highly recommend!
Frequently Asked Questions
Common questions about super screen / no-see-um installation in St. Johns, FL
How much does super screen / no-see-um installation cost in St. Johns?
Cost depends on size, mesh selection, and condition of the existing frame. We provide a free on-site estimate before any work begins in St. Johns. Call (904) 679-9509.
Do you serve all of St. Johns?
Yes, we cover all of St. Johns and the surrounding St. Johns County area.
What's your turnaround for super screen / no-see-um installation in St. Johns?
Most jobs are scheduled within a few business days. Storm damage and emergency repairs are prioritized.
What warranty applies?
2 year warranty on material and installation
Free Estimate for Super Screen / No-See-Um Installation in St. Johns
P&D Screen Repair — fast response, 1-year warranty.