P&D Screen Repair Logo
Custom Screen Projects in Ponte Vedra, FL
Ponte Vedra • St. Johns County
5.0
Based on Google reviews

Custom Screen Projects in Ponte Vedra, FL

Custom screening solutions for unique applications.

Same-Day Estimates
1-Year Warranty
Licensed & Insured
Free Quote
(904) 679-9509
500+
Happy Customers
5+yrs
Serving Jacksonville
1,000+
Projects Completed
5.0
Google Rating

Inland Sawgrass and golf-community neighborhoods with expansive lanai cages and pool screen enclosures.

Expert Custom Screen Projects for Ponte Vedra Homeowners

Every property has unique needs. We design and install custom screening solutions for non-standard applications, special requests, and creative projects.

Benefits

  • Tailored to your needs
  • Professional design
  • Quality materials
  • Expert installation

Our Process

  1. 1Consultation and design
  2. 2Material selection
  3. 3Custom fabrication
  4. 4Professional installation
  5. 5Final walkthrough

Warranty

1 year warranty on custom work

Two-story homes in Nocatee bring a gable-end enclosure challenge that most aluminum cage contractors won't quote. The roofline pitch on a second-floor overhang doesn't cooperate with standard 2x6 box-frame headers, and matching the existing anodized aluminum finish on the lower pool cage matters when the Nocatee Community Development District is reviewing your permit photos. Marsh Landing has a different version of this problem — large corner lots where the outdoor kitchen pad sits six inches below the pool deck elevation and off-axis, leaving an L-shaped footprint with no catalog solution. Custom screen work in Ponte Vedra is almost always site-specific: a field measure, custom-cut extrusions, and a build that actually fits your slab instead of the other way around. Phifer BetterVue mesh is our standard spec for high-visibility panels where you've paid for an Intracoastal view and don't want a dark screen wall blocking it. Call (904) 679-9509 for a free on-site estimate.

The housing mix across 32082 and 32081 covers a wide range. Palm Valley has 1970s and early-'80s ranch homes with original patio slabs that were never designed for an enclosure — posts need epoxy-bolt retrofitting into 3.5" concrete before any frame goes up. Nocatee's newer subdivisions like Crosswater Village and eTown see the opposite challenge: outdoor kitchens, spa pads, and extended covered lanais poured with enclosures in mind, but still requiring custom connector framing to tie the sections together cleanly. Salt-air corrosion from the Intracoastal corridor moves faster than most homeowners expect — frame oxidation on untreated fasteners can show within 3–4 years on properties within a half-mile of the water. Anodized extrusions hold up significantly better than powder-coated tubing in that environment. West-facing porches on Solano Road and along A1A face intense afternoon UV from May through October, which is exactly where motorized retractable screen systems — or at minimum a 90% solar privacy mesh panel — make more sense than standard 18x14 fiberglass screen.

Common Custom Screen Projects Issues in Ponte Vedra

Outdoor Kitchen Footprints That Don't Match the Pool Cage

Outdoor kitchens in Nocatee's 32081 corridor often sit on a separate concrete pour — offset from the pool deck by a few inches or a few feet, sometimes at a slightly different elevation. Standard pool cage panels can't bridge that gap cleanly without an obvious patch seam. We fabricate custom connector sections using 2x6 hollow anodized aluminum tubing to span the irregular transition, then screen the combined space with Phifer 18x14 standard fiberglass for most applications, or 20x20 super-screen no-see-um mesh for anything near the marsh or a preserve buffer. The connector framing adds material and labor — typically $900–$1,500 above a straightforward rescreen — but the result is a fully enclosed outdoor kitchen and pool area with no gap for weather or bugs. Field measure appointments are usually available within 3 business days. Call (904) 679-9509 to get scheduled.

Gable-End Panels on Two-Story Lanais

Custom homes in Palencia and northern Ponte Vedra Beach frequently have covered lanais that extend out from a second-story roofline, creating a gable-end framing challenge at heights that standard cage contractors don't typically handle. Getting a screen panel up to that elevation requires custom vertical posts, and attachment to the home's fascia at 16–20 feet can't be lag-screwed into soffit board — it needs anchor bolts set into concrete block or engineered lumber. Wind loading on gable-end panels above 14 feet is significant during August–October hurricane season, especially on east-facing elevations where Atlantic storm tracks push hardest. Those installs use hurricane-rated tie-down hardware at both the header plate and base connection. Phifer TexTreme is the right mesh call on upwind-facing gable panels — higher tensile strength than standard fiberglass and less susceptible to screen-bow under sustained wind. Gable-end installs typically run $4,500–$8,000 depending on height and panel count.

Carport Conversions in Palm Valley's Older Housing Stock

Converting an open carport into a screened room is one of the more structurally involved custom projects we do. Palm Valley homes built in the 1970s and early '80s often have 3.5" carport slabs with no embedded anchor bolts — posts need to be epoxy-anchored to depth before any aluminum frame can go up. Beam height and roof pitch on those older structures vary house to house, so there's no template approach. St. Johns County requires a structural permit for enclosed carport additions, and the application includes drawings filed under a licensed contractor — we handle that under contractor license #1136541. Depending on carport size and roof complexity, a full screen-in typically runs $3,800–$7,500 installed. A 2-year warranty applies to any Phifer TexTreme or 20x20 super-screen mesh used in the project, and a 1-year workmanship warranty covers the structural framing.

Motorized Retractable Screens for West-Facing Ponte Vedra Porches

West-facing lanais along A1A and the Ponte Vedra Beach corridor take direct afternoon sun from roughly 2 p.m. until sunset year-round. Fixed screen panels handle the bugs, but motorized retractable systems give homeowners the flexibility to open up completely on overcast days or cool evenings, then drop the screens when UV peaks or no-see-ums pick up from the Guana Tolomato estuary. We install Phantom Screens motorized systems on custom openings up to 16 feet wide, using Phifer BetterVue mesh for maximum visibility through the screen or 90% solar privacy mesh for sun and glare control. Motors are either 110V hardwired or 12V battery-operated with remote. Installation runs $1,400–$2,900 per opening depending on width and motor type. Both the screen fabric and drive mechanism carry a 2-year warranty.

Screen Rooms Over Freestanding Spas and Hot Tubs

A freestanding spa on its own pad — separate from the main pool deck — needs its own cage structure rather than an extension of the pool enclosure. Clearance height has to account for the spa cover at full lift, typically 42–48 inches, which usually means a minimum interior height of 7 feet on the enclosure frame. The constant humidity inside a spa room accelerates corrosion if the aluminum isn't properly anodized, so we spec 2x2 anodized extrusions throughout with a ridge cap system and perimeter gutter channel for condensation drainage. New York Wire 18x14 fiberglass handles most spa enclosures well. If the spa backs up to a lake or wetland preserve — common across several 32082 communities near the GTM Research Reserve — we upgrade to 20x20 no-see-um mesh as standard. Standalone spa enclosures in Ponte Vedra typically run $3,000–$5,800 installed. Call (904) 679-9509 for a free on-site measure.

Frequently Asked Questions

How fast can you get to Ponte Vedra for a custom screen project estimate?

From our Jacksonville base, Ponte Vedra is a straightforward run — down Butler Boulevard to A1A for beach-side addresses, or I-95 south to CR 210 for Nocatee and the 32081 zip. Estimate appointments are typically available within 2–3 business days. Custom projects without a permit requirement can usually move to install within 2–3 weeks from a signed quote. Permitted work — carport enclosures, structural gable-end builds — adds 3–5 weeks for St. Johns County review. Call (904) 679-9509 to schedule your free on-site estimate, and we'll give you a realistic project timeline based on scope and permit requirements.

What does a custom screen enclosure or screened room cost in Ponte Vedra?

Pricing depends heavily on project scope, but here's a realistic breakdown by type. A screened room over an existing covered patio with no structural changes runs $2,500–$4,500. Carport conversions with structural permit come in at $3,800–$7,500. Gable-end enclosures on two-story homes start around $4,500 and scale up with height and panel count. Motorized retractable screen openings run $1,400–$2,900 per opening installed. Standalone spa enclosures are $3,000–$5,800. All pricing is based on a free on-site estimate and comes with an itemized written quote — no ballpark figures, no invoice surprises.

Does Nocatee's HOA require approval before building a custom screen enclosure?

Yes. Nocatee CDD and most of its sub-associations — Crosswater Village, Coastal Oaks, eTown — require ARB approval before any exterior addition, including screen enclosures and screened rooms. The review process typically runs 3–4 weeks, and the submittal requires elevation drawings, material specs, and color chips. We prepare the full documentation package as part of the project, including Phifer mesh spec sheets and anodized aluminum color samples for the ARB board. The structural permit application goes in under licensed contractor #1136541, which covers the St. Johns County review side in parallel. Plan for 6–8 weeks from signed contract to install start on fully permitted and HOA-approved custom projects in Nocatee.

Can you match the frame color on my existing pool cage when adding a custom section?

Usually, yes. The two most common anodized finishes in Ponte Vedra — mill-finish silver and dark bronze — are standard stock. Most builds in 32082 and 32081 from the 1990s forward used one of those two profiles. We source extrusions from Florida Glass & Mirror and match the profile size to your existing cage where possible, so the joint between old and new framing isn't obvious from the patio. Powder-coated frames from older installs are harder to match exactly, but once mesh is in place the difference is minor at normal viewing distance. For golf community addresses in Marsh Landing or Sawgrass Country Club where the HOA approval photo matters, we can bring a sample section out during the estimate visit so you can verify the color match before signing off.

What warranty do you offer on custom screen enclosure work?

Standard rescreen mesh replacement carries a 1-year workmanship warranty. Custom builds using Phifer TexTreme, Phifer BetterVue, or 20x20 super-screen no-see-um mesh come with a 2-year warranty on both materials and labor. Motorized retractable systems — including the Phantom Screens hardware we install — carry a 2-year warranty on the drive mechanism and screen fabric. Structural framing on new enclosures is built to Florida Building Code specifications and warranted against workmanship defects for 1 year. If a spline groove separates, a corner bracket works loose, or a ridge cap section lifts within the warranty period, we come back at no charge. Call (904) 679-9509 with any warranty questions.

Do you handle storm damage documentation for custom screen enclosures in Ponte Vedra?

Yes, and coastal St. Johns County takes a hit every few seasons. After a named storm or major wind event, we come out, photograph the damage in detail, and prepare a written scope-of-loss document that meets standard insurance adjuster requirements. Custom enclosures — gable-end builds, motorized systems, outdoor kitchen screen additions — need more thorough documentation than a standard pool cage because the replacement cost is higher and the scope isn't obvious to adjusters unfamiliar with custom fabrication. Rebuilt structures go in to current wind-rated specs, which typically means the replacement holds better than the original install. Call (904) 679-9509 to schedule a post-storm assessment — same-week availability after named storms in the Ponte Vedra and Palm Valley area.

Need Custom Screen Projects in Ponte Vedra?

Free on-site estimate, fast response, 1-year warranty.

(904) 679-9509

Other Services in Ponte Vedra

Complete Rescreen

Complete Rescreen

Full screen replacement for enclosures, patios, and pool areas.

Learn More
Screen Panel Replacement

Screen Panel Replacement

Replace individual damaged screen panels quickly and affordably.

Learn More
Patio Screen Door Replacement

Patio Screen Door Replacement

Fixing or replacing door screens, handles, hinges, latches, and springs.

Learn More
Pet Screen Installation

Pet Screen Installation

Heavy-duty pet-resistant screening for homes with dogs and cats.

Learn More
Pool Enclosure Repair

Pool Enclosure Repair

Complete pool cage repair including screens, frames, and structural elements.

Learn More
Patio Hardware Replacement

Patio Hardware Replacement

Replacing rusty screws, bolts, hinges, and other small components that hold your screen structure together.

Learn More

Why Choose P&D Screen Repair?

Quality Guaranteed

1-year warranty on all work. We use premium materials and expert craftsmanship.

Fast & Reliable

Most repairs completed same-week. Free estimates within 2 business hours.

Local & Trusted

Family-owned, serving Jacksonville since 2022. Licensed and insured.

What Our Customers Say

5.0
Based on Google reviews
WC
Wayne Chaput
4 days ago

Paul was extremely professional, responsive and competitive. I appreciate a business that exhibits proper ethics in a manner as was displayed in this project. Thank you, Paul

JH
Jorge Hernandez
4 days ago

Great service On time and good quality

JM
Jackie McClellan
2 weeks ago

Excellent job!! Very nice young man! Absolutely would recommend!

KM
Ken Middleton
4 weeks ago

P&D Screen Repair did an outstanding job on a complete pool screen. They finished the job in 2 days, despite constant rain. I highly recommend this company and their prices are very reasonable.

DR
Daria Rykun
9 weeks ago

Great job on my patio rescreen! Everything was done fast, clean, and with excellent quality. Very professional and easy to work with. I highly recommend!

Frequently Asked Questions

Common questions about custom screen projects in Ponte Vedra, FL

How much does custom screen projects cost in Ponte Vedra?

Cost depends on size, mesh selection, and condition of the existing frame. We provide a free on-site estimate before any work begins in Ponte Vedra. Call (904) 679-9509.

Do you serve all of Ponte Vedra?

Yes, we cover all of Ponte Vedra and the surrounding St. Johns County area.

What's your turnaround for custom screen projects in Ponte Vedra?

Most jobs are scheduled within a few business days. Storm damage and emergency repairs are prioritized.

What warranty applies?

1 year warranty on custom work

Free Estimate for Custom Screen Projects in Ponte Vedra

P&D Screen Repair — fast response, 1-year warranty.

(904) 679-9509
(904) 679-9509