
Custom Screen Projects in Fleming Island, FL
Custom screening solutions for unique applications.
Upscale residential area with luxury homes featuring large screened pool enclosures and patios.
Expert Custom Screen Projects for Fleming Island Homeowners
Every property has unique needs. We design and install custom screening solutions for non-standard applications, special requests, and creative projects.
Benefits
- ✓Tailored to your needs
- ✓Professional design
- ✓Quality materials
- ✓Expert installation
Our Process
- 1Consultation and design
- 2Material selection
- 3Custom fabrication
- 4Professional installation
- 5Final walkthrough
Warranty
1 year warranty on custom work
Eagle Harbor and Fleming Island Plantation were built with outdoor living as a core selling point — wide rear lots, lake-facing patios, and outdoor kitchens with KitchenAid built-in grills specified in original construction plans. Standard rectangular cage kits don't accommodate those layouts. Spa alcoves, angled deck edges, and kitchen bump-outs need custom fabrication from the post anchors up. Most custom enclosure calls we take in 32003 come from homeowners whose first contractor looked at the slab and declined. Doctors Lake and Black Creek are right there. Homes on the water-facing side of 32003 deal with humidity that doesn't quit, and no-see-ums that emerge at dusk from May through October without much warning. That combination — complex outdoor kitchens plus genuine insect pressure — is exactly what custom screen work in Fleming Island is built around.
Fleming Island's planned communities — Eagle Harbor, Eagle Landing, Magnolia Point, Pace Island — were developed mostly between 1998 and 2014, primarily large-lot two-story models on generous rear footage. Pools typically went in at original construction, but the screen enclosure project came a decade later. By then there's often a built-in grill counter, a hot tub, or a pergola already claiming slab space. That conflict between original footprint and current additions is the defining challenge of custom screen work in the 32003 zip code. The Fleming Island Golf Course and Plantation community sit adjacent to some of the largest rear lots in Clay County — homes backing the fairways or the retention pond network along Town Center Parkway. HOA design guidelines in Magnolia Point and Eagle Landing specify color-matched anodized aluminum framing, which means custom cage work has to include finish matching, not just structural compliance. That's a detail contractors from outside the area frequently miss on first quote. Bronze anodized is the default spec here; it reads neutral from the street and blends with most of the stucco exteriors built throughout 32003.
Common Custom Screen Projects Issues in Fleming Island
Outdoor Kitchen Islands That Break the Standard Frame Grid
A built-in KitchenAid grill island or masonry BBQ counter changes the rear slab geometry completely. Standard extruded aluminum cage panels won't bridge an irregular bump-out without gaps or frame distortion. The fix is a custom ribbon-frame section fabricated around the island perimeter, with ventilation panels and exhaust clearance built into the plan — before a single spline gets seated. Corner brackets at the irregular angles have to be site-bent, not catalog-ordered. We've built this layout at properties off Hibernia Road and Town Center Parkway repeatedly — the geometry problem is familiar, and the solution is consistent: field-measure first, order custom-cut aluminum second.
No-See-Um Pressure on Lake-Adjacent and Wetland-Backing Lots
Eagle Harbor's water-facing lots sit against retention ponds and the tidal creek system feeding into the St. Johns River corridor. Standard 18x14 fiberglass mesh barely slows no-see-ums near standing water. Homes on those lots need a full upgrade to 20x20 Phifer super-screen — finer weave, slightly reduced airflow, but the difference in evening usability is dramatic from May through October. The Doctors Lake waterfront is the same situation. 20x20 super-screen, full perimeter, no gaps at the kick-plate seam where the lower panel meets the slab. That's a 2-year warranty on the mesh and the spline work — call (904) 679-9509 for a free on-site estimate.
Two-Story Gable-End Enclosures on Larger Rear Elevations
Fleming Island Plantation's two-story rear elevations extend past the 10-foot height that standard aluminum cage kits cover. A proper gable-end enclosure means fabricating a tapered frame section in extruded anodized aluminum, anchoring the top rail with hurricane-rated tie-downs to Clay County wind uplift codes, and sealing a ridge cap cleanly against the existing roofline. Standard kits stop at 10 feet. Gable-end builds start there. The anchor bolt depth into the slab edge matters too — Clay County inspectors check post anchoring on permitted custom enclosures, and undersized anchors on two-story builds are a common failure point on older permits from the early 2000s builds throughout Eagle Harbor.
Frequently Asked Questions
How fast can you get to Fleming Island for Custom Screen Projects?▼
Fleming Island sits about 20 minutes from our Orange Park base — we run US-17 south to the Fleming Island Expressway regularly for Clay County calls. Same-week scheduling is standard and same-day estimates are available most weekdays. Call (904) 679-9509 to check availability.
Can you build a screen enclosure around an existing outdoor kitchen without demo work?▼
Yes — and it's a significant part of what we build in Eagle Harbor and Eagle Landing. We custom-frame around built-in islands, countertops, and anchor posts without demolition. The critical steps are measuring for exhaust clearance and getting the right spline groove depth on panels that terminate at irregular or angled corners. On properties near Hibernia Road, the rear lot depth usually gives enough clearance. Tighter lots in Pace Island sometimes require a compact box-frame design rather than the standard ribbon-frame approach.
How much more does a custom screen project cost compared to a standard rectangular cage?▼
Custom builds typically run 20-40% above standard cage pricing, depending on shape complexity and mesh spec. Upgrading from standard 18x14 fiberglass to BetterVue or Phifer super-screen on a non-standard layout adds cost but extends the lifespan considerably. Free on-site estimates include full line-item detail — call (904) 679-9509.
Do HOA rules in Eagle Harbor or Magnolia Point affect what mesh and frame color I can use?▼
They do. Eagle Harbor and Magnolia Point both have design review requirements covering frame color and mesh visibility. Bronze anodized aluminum is the most common compliant finish in 32003 — neutral from the street, matches most stucco palettes. We document material specs in the estimate, which most HOAs accept for their approval submission. If your HOA requires a specific Phifer mesh designation or a particular 2x2 vs 2x6 frame gauge, note that when you call — (904) 679-9509.
Need Custom Screen Projects in Fleming Island?
Free on-site estimate, fast response, 1-year warranty.
(904) 679-9509Other Services in Fleming Island

Patio Screen Door Replacement
Fixing or replacing door screens, handles, hinges, latches, and springs.

Pool Enclosure Repair
Complete pool cage repair including screens, frames, and structural elements.

Patio Hardware Replacement
Replacing rusty screws, bolts, hinges, and other small components that hold your screen structure together.
Why Choose P&D Screen Repair?
Quality Guaranteed
1-year warranty on all work. We use premium materials and expert craftsmanship.
Fast & Reliable
Most repairs completed same-week. Free estimates within 2 business hours.
Local & Trusted
Family-owned, serving Jacksonville since 2022. Licensed and insured.
What Our Customers Say
Paul was extremely professional, responsive and competitive. I appreciate a business that exhibits proper ethics in a manner as was displayed in this project. Thank you, Paul
Great service On time and good quality
Excellent job!! Very nice young man! Absolutely would recommend!
P&D Screen Repair did an outstanding job on a complete pool screen. They finished the job in 2 days, despite constant rain. I highly recommend this company and their prices are very reasonable.
Great job on my patio rescreen! Everything was done fast, clean, and with excellent quality. Very professional and easy to work with. I highly recommend!
Frequently Asked Questions
Common questions about custom screen projects in Fleming Island, FL
How much does custom screen projects cost in Fleming Island?
Cost depends on size, mesh selection, and condition of the existing frame. We provide a free on-site estimate before any work begins in Fleming Island. Call (904) 679-9509.
Do you serve all of Fleming Island?
Yes, we cover all of Fleming Island and the surrounding Clay County area.
What's your turnaround for custom screen projects in Fleming Island?
Most jobs are scheduled within a few business days. Storm damage and emergency repairs are prioritized.
What warranty applies?
1 year warranty on custom work
Free Estimate for Custom Screen Projects in Fleming Island
P&D Screen Repair — fast response, 1-year warranty.



